SAT

The SAT is the College Board's admissions test, taken on a laptop or tablet in its Bluebook app. This guide covers what each section asks, the tools you get, how the day runs and how scores are read, for the 2026-27 testing year.

Updated

2 h 14 minTime in total
98Questions
4Timed parts
400–1600Score scale

The shape of the paper

  • Reading and Writing

    54questions64minutes

    1 min 11 s a question on average

    2 timed parts

  • Math

    44questions70minutes

    1 min 35 s a question on average

    2 timed parts

  • The second part adapts to how the first went.
  • Nothing is deducted for a wrong answer, so never leave one blank.

What the exam is

The SAT is run by the College Board, which handles registration, the test itself, scoring and sending scores to universities. Colleges and universities use it in admissions, mostly in the United States but elsewhere too, and some scholarship programmes use it as well. Whether a university requires it, accepts it or ignores it is that university's own policy, so check the admissions page of every place you apply to.

There are two ways to sit it. SAT Weekend is taken on a Saturday at a test centre you book yourself; Sunday dates exist only for students who cannot test on a Saturday for religious reasons. SAT School Day is given at your own school during the school day, where your school offers it. Outside the United States you register for an international test centre.

The test is digital. You sit it in Bluebook, the College Board's testing app, on a device you bring or borrow from the College Board, with staff supervising the room.

How the adaptive design works

Each section is split into two modules. The first module of a section has a broad mix of easy, medium and hard questions, and how you do on it decides whether your second module is harder or easier. The College Board says a range of section scores is possible whichever second module you get, so there is nothing to gain from trying to work out which one you are in.

Your first module does two jobs: its questions count, and it decides which second module you get. Work carefully there rather than fast. Time left over in a module does not carry over to the next.

Within a module you can move freely between questions, change answers and mark questions to come back to. When the module's time runs out, Bluebook moves you on automatically, and once you have left a module you cannot go back to it. You cannot start the Math section before the Reading and Writing section's time is up.

Each module also carries two questions that are being tried out for future tests and do not count towards your score. Treat every question as if it counts.

Reading and Writing: what the questions are like

Every question is a short passage, or a pair of short passages, followed by one multiple-choice question with four options and a single best answer. Passages run from about 25 to 150 words and are drawn from literature, history and social studies, the humanities and science.

Questions of the same kind come together, arranged from easiest to hardest within each group. Difficulty rises through a group and drops back when a new kind of question starts, so a hard question is not a sign that the rest of the module will be hard. The four areas below are tested in both modules.

Craft and Structure
Words in Context; Text Structure and Purpose; Cross-Text Connections
Information and Ideas
Central Ideas and Details; Command of Evidence; Inferences
Standard English Conventions
Boundaries; Form, Structure, and Sense
Expression of Ideas
Rhetorical Synthesis; Transitions
  • Words in Context: choose the word or phrase that fits the passage most precisely. Read the whole sentence; the right answer is often not the word's most common meaning.
  • Text Structure and Purpose: say what a passage, or a sentence in it, is doing rather than what it says.
  • Cross-Text Connections: two short texts on one topic, and a question about how one author would respond to the other.
  • Central Ideas, Inferences and Command of Evidence: the answer has to be supported by the text. An option that is true in the world but not stated or implied in the passage is wrong.
  • Boundaries: punctuation within and between sentences, such as commas, semicolons and colons.
  • Form, Structure, and Sense: verb tense and agreement, pronouns, plurals and possessives.
  • Transitions: the linking word or phrase that shows how two sentences relate.
  • Rhetorical Synthesis: a set of notes and a stated goal. Read the goal first, then choose the sentence that uses the notes to meet it.

Math: what the questions are like

About three quarters of the questions are multiple choice with four options. The rest are student-produced responses, where you type your own answer into a box. Around 30% are set in a real-world context from science, social studies or everyday life. Within each module the questions are arranged from easiest to hardest.

A calculator is allowed on every question. Bluebook has a Desmos calculator built in, which switches between graphing and scientific modes, and you may bring your own approved calculator as well. A reference sheet of formulas is available throughout the section. The College Board publishes how many questions of each area a Math section holds:

Algebra
13 to 15 questions: linear equations, inequalities, functions and systems
Advanced Math
13 to 15 questions: quadratics, exponential and other nonlinear functions, equivalent expressions
Problem-Solving and Data Analysis
5 to 7 questions: ratios, rates, percentages, probability and data
Geometry and Trigonometry
5 to 7 questions: area and volume, lines and angles, triangles, circles, right-triangle trigonometry

The rules for typing a student-produced response, from the College Board's own test directions:

  • If you find more than one correct answer, enter only one.
  • You can enter up to 5 characters for a positive answer and up to 6, including the minus sign, for a negative one.
  • If a fraction does not fit, enter its decimal equivalent. If a decimal does not fit, truncate or round it at the fourth digit. For an answer of -1/3, the entries -1/3, -.3333 and -0.333 are accepted; -.33 and -0.33 are not.
  • Enter a mixed number such as 3 1/2 as an improper fraction (7/2) or a decimal (3.5).
  • Do not type a percent sign, comma or dollar sign.

Desmos calculator toolkit

1 / 14

solve an equation by graphing each side

Some equations take several steps to rearrange: the variable on both sides, fractions, or a square that is awkward to undo. Desmos lets you skip the algebra. Graph each side of the equation as its own line or curve, and the solution is the x-value where they cross.

Each side of 3x - 2 = x + 2 becomes its own line, and they cross where x = 2.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the left side as a new line: y = 3x - 2.
  • Type the right side on the next line: y = x + 2.
  • Click where the two graphs cross to see the point's coordinates.
  • Read the x-coordinate. That is the solution; the y-coordinate is only the value both sides share there.

Solve 3x - 2 = x + 2. Graph y = 3x - 2 and y = x + 2. They cross at (2, 4), so x = 2. A quick check by hand confirms it: 3(2) - 2 = 4 and 2 + 2 = 4.

When not to use it: a one-step equation such as x + 5 = 9 is faster by hand, and typing it costs more time than it saves. And if the graphs never cross, the equation has no solution, which is an answer in itself.

solve a system of two linear equations

A system of two equations asks for the one point that works in both. Instead of substitution or elimination, graph both equations: the solution is where the two lines cross.

Graphing y = 2x - 1 and y = -x + 5 shows the solution where the lines meet, at (2, 3).Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the first equation on its own line: y = 2x - 1.
  • Type the second equation on the next line: y = -x + 5.
  • Click the point where the lines cross.
  • Read both coordinates: the x-value and the y-value together are the solution.

Solve y = 2x - 1 and y = -x + 5. Graph both. The lines meet at (2, 3), so x = 2 and y = 3. A check by hand: 2(2) - 1 = 3, and -2 + 5 = 3.

When not to use it: if a question asks how many solutions a system has, look at the graph rather than clicking. Parallel lines never meet, so there is no solution, and two lines that lie on top of each other share every point.

evaluate a function

A question may define a function and ask for its value at a number, or ask you to compare two values. Define the function once in Desmos with f(x) = ..., and it calculates any value you type, without arithmetic slips.

After defining f(x) = x² - 3x + 2, typing f(5) shows its value, 12.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the function with its name, leaving the exponent with the right arrow: f(x) = x^2 - 3x + 2.
  • On the next line, type the function at the number you need, such as f(5).
  • Read the value Desmos shows beside it. Type more values on new lines to compare them.

For f(x) = x² - 3x + 2, typing f(5) shows 12, because 25 - 15 + 2 = 12. Typing f(-1) on the next line shows 6.

When not to use it: if the function is simple, such as f(x) = 2x + 1, work it out in your head. And when a question describes a function in words or with a table, type it into Desmos only once you are sure what it is.

find the zeros of a function

The zeros, roots or x-intercepts of a function are the x-values where it equals 0, which is where its graph crosses the x-axis. Factoring works when the numbers are friendly. When they are not, or when a question only asks how many zeros there are, graph it.

The graph of y = x² - 2x - 3 crosses the x-axis at x = -1 and x = 3.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the function as y = ..., leaving the exponent with the right arrow.
  • Click each grey dot where the graph meets the x-axis.
  • Read the x-coordinate of each: those are the zeros. Count the crossings when a question asks how many there are.

For y = x² - 2x - 3, the graph crosses the x-axis at (-1, 0) and (3, 0), so the zeros are -1 and 3. That matches the factored form (x + 1)(x - 3).

When not to use it: if the equation is already factored, like (x + 1)(x - 3) = 0, the zeros are in front of you. A question about the sum or the product of the roots can often be answered from the coefficients, without finding each root.

find the vertex of a parabola

Questions about a quadratic often turn on its vertex: the lowest or highest point, its x-value, or the smallest or largest value the function takes. Completing the square by hand is slow and easy to get wrong. Graph the equation and Desmos marks the vertex for you.

Clicking the lowest point of y = x² - 4x + 1 shows its vertex, (2, -3).Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the equation, pressing the right arrow after the exponent to leave it: y = x^2 - 4x + 1.
  • Click the curve's turning point, the grey dot at its bottom or top.
  • Read the coordinates. The x-value is where the vertex is; the y-value is the smallest or largest value.

For y = x² - 4x + 1, the vertex is (2, -3). The parabola opens upward, so -3 is the smallest value the function takes, and it takes it at x = 2.

When not to use it: if the equation is already in vertex form, such as y = (x - 2)² - 3, the vertex (2, -3) is written in it. Read it off rather than graphing.

check whether two expressions are equivalent

Some questions ask which expression is equivalent to a given one. Graph the original and each choice: equivalent expressions draw exactly the same graph, so a choice whose curve does not sit on top of the original is wrong.

(x + 1)² and x² + 2x + 1 draw the same curve, so they are equivalent; x² + 1 does not.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the original expression as y = ..., for example y = (x + 1)^2.
  • Type an answer choice on the next line, such as y = x^2 + 2x + 1.
  • If the two graphs overlap completely, the expressions are equivalent. If they separate anywhere, they are not.

Is (x + 1)² equivalent to x² + 2x + 1? Graph both: the curves lie exactly on top of each other, so yes. Graph x² + 1 as well: it separates from the other two, so it is not equivalent.

When not to use it: two graphs that look alike near the middle can still differ far away, so zoom out before deciding. And when a question asks for an expression in a particular form, such as factored, the graph can confirm your answer but cannot write it.

find an unknown constant with a slider

Some questions give an equation with an unknown constant, such as k, and a condition: the line passes through a point, or two graphs just touch. Type the equation with the letter left in. Desmos offers a slider for it, and you can change the value until the condition is met.

With k on a slider, the line y = kx + 1 passes through the point (2, 7) when k = 3.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the point or the other graph from the question on the first line.
  • On the next line, type the equation with the constant as a letter, for example y = kx + 1.
  • Press the button Desmos shows to add a slider for k.
  • Change the value of k until the condition holds, then read it.

The line y = kx + 1 passes through (2, 7). Plot the point, then change k: at k = 3 the line goes straight through it. A check by hand: 3(2) + 1 = 7.

When not to use it: if the constant is easy to solve for directly, as here by putting x = 2 and y = 7 into the equation, that is quicker. The slider earns its time when the condition is hard to write as an equation, such as two graphs just touching.

test answer choices against an inequality

Questions about inequalities often ask which point satisfies one, or which region a graph shows. Desmos shades the region an inequality describes, so you can see at once which points belong in it.

y < 2x + 1 shades the region below the line: (3, 2) is inside it and (1, 4) is not.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the inequality with the less-than or greater-than sign, such as y < 2x + 1.
  • Type each answer choice's point on its own line.
  • See which points fall in the shaded region. A point on a dashed line is not included; a point on a solid line is.

For y < 2x + 1, test (1, 4) and (3, 2). The point (3, 2) is in the shaded region, because 2 is less than 2(3) + 1 = 7. The point (1, 4) is not, because 4 is not less than 2(1) + 1 = 3.

When not to use it: for one point and a simple inequality, substituting takes seconds by hand. The graph pays off when there are several choices to test at once, or two inequalities whose shaded regions overlap.

find a circle's centre and radius

A circle's equation is not always in the tidy (x - h)² + (y - k)² = r² form. When its terms are multiplied out, finding the centre by hand means completing the square twice. Graph it instead: the centre and the radius can be read from the picture.

The circle x² + y² - 4x + 2y - 4 = 0 has its top at (2, 2) and its bottom at (2, -4), so its centre is (2, -1) and its radius is 3.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the equation as it is given, pressing the right arrow after each exponent.
  • Click the top and the bottom of the circle to see their coordinates.
  • The centre is halfway between them, and the radius is half the distance from top to bottom.

For x² + y² - 4x + 2y - 4 = 0, the top point is (2, 2) and the bottom point is (2, -4). Halfway between them is (2, -1), the centre. They are 6 apart, so the radius is 3.

When not to use it: if the equation is already in the form (x - 2)² + (y + 1)² = 9, read the centre (2, -1) and the radius, the square root of 9, directly. Watch the signs: (y + 1) means the centre's y-coordinate is -1.

check whether a point is inside a circle

A question may ask whether a point lies inside a circle, on it, or outside it. By hand, that means putting the point into the equation and comparing the result with the radius squared. In Desmos, graph the circle, plot the point, and look.

The point (6, 5) sits well outside the circle (x - 1)² + (y - 2)² = 16.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the circle's equation, pressing the right arrow after each exponent.
  • On the next line, type the point in brackets, such as (6, 5).
  • Look where the dot sits: inside the ring, on it, or outside. Zoom in if it is close to the edge.

For (x - 1)² + (y - 2)² = 16 and the point (6, 5), the dot lands well outside the circle. By hand, (6 - 1)² + (5 - 2)² = 34, which is more than 16, so it is outside.

When not to use it: when the point is very close to the circle, the picture alone can mislead. Put the point into the equation and compare the result with the radius squared: less means inside, equal means on the circle, and more means outside.

find a line of best fit from a table

Data questions sometimes give a table of values and ask for the linear model that fits it, or for a prediction from that model. Desmos can calculate the line of best fit from the numbers themselves, which is faster and more exact than drawing it by eye.

With the table typed as two lists, Y ~ mX + b gives the line of best fit.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the x-values as a list: X = [1, 2, 3, 4, 5].
  • Type the y-values as a list on the next line: Y = [3, 5, 6, 9, 10].
  • Type (X, Y) to plot the points.
  • Type Y ~ mX + b, using the tilde key. Desmos shows the values of m and b.

For x-values 1 to 5 and y-values 3, 5, 6, 9 and 10, Y ~ mX + b gives a slope m of 1.8 and an intercept b of 1.2, so the model is y = 1.8x + 1.2.

When not to use it: if a question only asks which of several lines fits best, test the answer choices against two of the points first. And a model is only a model: a prediction far outside the table's range is less reliable than one inside it.

fit an exponential model to a table

When the values in a table grow by the same factor each step, rather than by the same amount, the right model is exponential: y = ab^x. Desmos can find a and b from the data, just as it finds a line of best fit.

Y ~ ab^X fits an exponential model to the table: the values start near 2 and grow by about 1.5 times each step.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the x-values as a list: X = [0, 1, 2, 3, 4].
  • Type the y-values as a list on the next line: Y = [2, 3, 4.5, 6.75, 10.13].
  • Type (X, Y) to plot the points.
  • Type Y ~ ab^X, pressing the right arrow after the exponent. Desmos shows a, the starting value, and b, the growth factor.

For x-values 0 to 4 and y-values 2, 3, 4.5, 6.75 and 10.13, Y ~ ab^X gives a close to 2 and b close to 1.5. The model is y = 2(1.5)^x: it starts at 2 and grows by half again each step.

When not to use it: first check that the data really grows by a factor. If the differences between the y-values are equal, the data is linear, and Y ~ mX + b is the model to use. A factor b between 0 and 1 means the values are shrinking, not growing.

find the mean, median and spread of a data set

Some data questions give a list of numbers, a table or a dot plot, and ask for the mean or the median. Others ask which of two data sets has the larger standard deviation. Type the numbers as a list once, and Desmos works out each value for you.

With the data typed as a list, mean, median and stdev each show one number.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type the data as a list, for example A = [4, 7, 7, 9, 13].
  • On the next line, type mean(A). Desmos shows the mean beside it.
  • Type median(A) on a new line to see the median.
  • To compare two data sets, type the second one as B. Then type stdev(A) and stdev(B). The larger value belongs to the data that is more spread out.

For the data 4, 7, 7, 9 and 13, mean(A) shows 8 and median(A) shows 7. To check by hand, add the numbers to get 40, and 40 divided by 5 is 8. For B = [6, 7, 8, 9, 10], stdev(B) is about 1.58 and stdev(A) is about 3.32, so A is more spread out.

Skip this when a question only asks how the mean changes when one value is added or taken away. Thinking it through is often quicker. A dot plot or a frequency table can stand for many values, so check that your list holds every one of them.

find unknown coefficients with a regression

Some questions say that two expressions are equal for every value of x, and ask for the unknown numbers in one of them. An example is (ax + 3)(5x + b) = 10x² + 31x + 24. A regression finds a and b for you, without expanding the brackets.

Checked at x = 1, 2, 3 and 4, the regression finds a = 2 and b = 8.Made with Desmos. Licensed CC BY-SA 4.0.
  • Type a short list of x-values, such as X = [1, 2, 3, 4].
  • On the next line, type the side you know, with X in place of x.
  • Then type the tilde key ~ and the side with the unknowns, also with X. Press the right arrow after each exponent.
  • Desmos shows the values of the unknowns under the line. If the question asks for a + b, type it on a new line.

For (ax + 3)(5x + b) = 10x² + 31x + 24, type 10X² + 31X + 24 ~ (aX + 3)(5X + b). Desmos shows a = 2 and b = 8, so a + b = 10. To check by hand, 5a = 10 gives a = 2, and 3b = 24 gives b = 8.

Skip this when one pair of matching terms gives the answer, as 3b = 24 does here. That is quicker. Use at least as many x-values as there are unknowns. If Desmos shows strange values, check what you typed first.

Bluebook and its tools

Every student has the same tools in Bluebook:

  • The Desmos calculator (Math only), in graphing or scientific mode. For 2026-27 it can be resized.
  • The reference sheet (Math only): the area and circumference of a circle, the areas of a rectangle and a triangle, the Pythagorean theorem, the 30-60-90 and 45-45-90 special right triangles, the volumes of a box, cylinder, sphere, cone and pyramid, and three facts: a circle has 360 degrees and 2π radians of arc, and the angles of a triangle add up to 180 degrees. For 2026-27 you can view it in a different layout and zoom in on charts, graphs and images.
  • Highlights and notes, to mark up a passage.
  • The option eliminator, to cross out answer choices you have ruled out.
  • Mark for Review, and a question menu showing which questions you have answered or marked.
  • A line reader, zoom, and colour contrast settings.
  • The timer. You can hide it, but it comes back when 5 minutes are left in the module.

Bluebook runs on a Windows laptop or tablet, a Mac laptop, an iPad, or a Chromebook that your school manages. It does not run on a personal Chromebook or a phone. For 2026-27, a Windows device must run Windows 11, because Windows 10 is no longer supported, and a Chromebook works only with verified mode enabled. If you cannot get a device, you can ask the College Board to lend you one; a request is not a guarantee, and a borrowed device means arriving 30 minutes earlier on the day to set it up.

A calculator you bring must be battery powered and silent. Calculators with a computer algebra system (such as the TI-Nspire CAS, HP Prime or Casio ClassPad), a QWERTY keyboard, wireless or Bluetooth, or a camera are not allowed, and neither is a calculator app on a phone, tablet or laptop. If your own calculator fails during the test, the built-in one is always there.

Registering and getting ready

You register on the College Board's website. For 2026-27 the fee is $68. Outside the United States there is a further $43 international fee, and some centres in Hong Kong, Macau, Singapore, South Korea and Taiwan add $24 more. Registering late costs $38 and changing your test centre $34. New for 2026-27: if the date or centre you want is full and you test in the United States, you can join a waitlist. Low-income students in the United States, and US citizens abroad, may qualify for a fee waiver that covers two tests.

From 5 days before your test you can complete exam setup in Bluebook. That generates your admission ticket, which you bring on the day: printed is preferred, a copy on your phone is accepted.

If you have a documented disability, accommodations such as extra time, extra breaks or text-to-speech are approved by the College Board's Services for Students with Disabilities. A school counsellor usually submits the request, and it has to go in at least 7 weeks before test day. An approval you already have for the PSAT or AP exams carries over. For 2026-27, students approved for text-to-speech or a screen reader bring their own wired, non-Bluetooth headphones, and embedded text-to-speech is given at a test centre unless another approved accommodation needs testing at school.

The weekend test dates still open for 2026-27, each with its registration deadline and the last day to register late or make changes:

3 October 2026
Register by 18 September; late until 22 September
7 November 2026
Register by 23 October; late until 27 October
5 December 2026
Register by 20 November; late until 24 November
6 March 2027
Register by 19 February; late until 23 February
1 May 2027
Register by 16 April; late until 20 April
5 June 2027
Register by 21 May; late until 25 May
August 2026
22 August 2026
September 2026
12 September 2026
October 2026
3 October 2026
November 2026
7 November 2026
December 2026
5 December 2026
March 2027
6 March 2027
May 2027
1 May 2027
June 2027
5 June 2027

How the day runs

Check in by 7:45 a.m. Test centre doors close at 8:00 a.m. unless your admission ticket says otherwise, and nobody is admitted once testing has started.

Staff give you one sheet of scratch paper. Write your full name on it, do not tear it, and ask for more if you need it. It is collected at the end, and you cannot bring your own.

There is one scheduled break of 10 minutes, between the Reading and Writing section and the Math section. Bluebook times it for each student, so the people around you may break at different moments. Leave your device open, keep your ID with you, and keep your phone off and put away. You can take an unscheduled break at another time, but the clock keeps running while you are out.

If the internet drops, keep going: your work is saved and you lose no time. If you are still offline when it is time to submit, you have until 11:59 p.m. local time the next day to reconnect and submit. If you see a low-battery warning, raise your hand. If your device crashes, sign back in to Bluebook and staff can resume your test.

A phone that makes a noise, is seen, or is reached for at any point, the break included, means immediate dismissal, and your scores can be cancelled. For serious breaches the College Board can bar a student from future tests.

What to bring

  • Your device, fully charged, with Bluebook installed and exam setup completed.
  • Your up-to-date admission ticket from the Bluebook app.
  • An acceptable photo ID: an original physical document (not a photocopy, not a digital ID) with a recent photo and your full legal name exactly as it appears on your ticket. A passport, a government-issued national or driving ID, or the student ID of the school you attend are accepted.
  • Pencils or pens for scratch work.
  • Your College Board account username and password.
  • An approved calculator, if you want one as well as Desmos.
  • Optional: a charging cable or portable charger, a backup device, and a snack and drink for the break.

What is not allowed

  • Phones, smartwatches, fitness trackers, smart glasses and any other wearable technology, during the test and during the break. They are turned off and put away before the test starts.
  • Your own scratch paper.
  • A calculator that breaks the policy above.
  • Leaving the room or using a device during the break in any way the staff have not allowed.

What the scores mean

You get a score for each section and a total. They are not a count of right answers: the College Board scores with item response theory, which takes account of the difficulty of the questions you got right and wrong, so two students with the same number correct in a section can get different scores.

The College Board sets college and career readiness benchmarks of 480 in Reading and Writing and 530 in Math. Your score report also shows percentiles: one against a nationally representative sample of US 12th graders, and one against students who actually took the SAT.

A good score is the one the universities you apply to are looking for, and that differs a lot from one to the next. Many publish the middle 50% range of scores of the students they admit; that is the number to compare yourself against.

Scores from a weekend test are usually released 2 to 4 weeks after test day. The release dates for autumn 2026:

Tested 12 September 2026
Scores 25 September
Tested 3 October 2026
Scores 16 October
Tested 7 November 2026
Scores 20 November
Tested 5 December 2026
Scores 18 December

Sending, choosing and cancelling scores

Each time you register for a weekend test, you can send your scores to four colleges or scholarship programmes for free if you name them by 9 days after the test. After that, or beyond four, each score report costs $15.

With Score Choice you decide which test dates' scores to send, though some colleges and scholarship programmes require all of them. Some colleges superscore, taking your best section scores across test dates; whether a college does is its own policy, so check each one.

You can cancel a weekend score up to one week after the test, or within 5 days for SAT School Day. A cancelled score is gone for good. The digital SAT has no Question-and-Answer Service, so you do not get your questions back after the test.

Watch out

Common mistakes

  • Rushing the first module of a section. Spare time does not carry over, and the first module decides which second module you get.
  • Reading an easier-feeling second module as bad news. A range of scores is possible from either.
  • Arriving without exam setup done, or with a Windows 10 laptop Bluebook no longer runs on.
  • Bringing a photocopy or a digital copy of your ID.
  • Checking a phone during the break.

Official references

Always use the specification and candidate instructions for your examination year. Guides explain the qualification; the platform’s available practice is shown separately at signup.

Trademarks named on this page are registered by the College Board, which is not affiliated with, and does not endorse, Exam.Harbour.