ESAT

ESAT, the Engineering and Science Admissions Test, is a computer-based test run by UAT-UK for engineering and science courses at Cambridge, Imperial, Oxford and UCL. This guide is for the October 2026 and January 2027 sittings, for entry in 2027.

Updated

The shape of the paper

  • Mathematics 1

    27questions40minutes

    1 min 29 s a question on average

  • Biology

    27questions40minutes

    1 min 29 s a question on average

  • Chemistry

    27questions40minutes

    1 min 29 s a question on average

  • Physics

    27questions40minutes

    1 min 29 s a question on average

  • Mathematics 2

    27questions40minutes

    1 min 29 s a question on average

  • Nothing is deducted for a wrong answer, so never leave one blank.

What the exam is

ESAT is run by UAT-UK, a not-for-profit partnership between Imperial College London and the University of Cambridge that also runs TMUA and TARA. It was first sat in October 2024 and replaced the older Cambridge tests (ENGAA and NSAA) and Imperial's own admissions tests. You take it on a computer at a Pearson VUE test centre.

There is no pass or fail. UAT-UK makes no admissions decisions and sets no cut score; each university decides how the result is used alongside the rest of your application. The test is designed to separate very able applicants, including those with the top grades at school, so expect to score lower than you do in school exams. That is by design and says nothing bad about you.

Which modules you sit

Everyone sits Mathematics 1. The other modules are set by the course you apply to: most courses want Mathematics 1 and two more, some fix which two, and some let you choose any two of Biology, Chemistry, Physics and Mathematics 2. Imperial's Design Engineering asks for Mathematics 1 and Mathematics 2 only.

If you apply to several ESAT courses whose required modules conflict, you may need four modules. UAT-UK approves four only when your courses genuinely need them, after a review of up to two working days, and a fourth module you do not need does not help your application. If you do not sit a module a course requires, your application to that course may be invalid.

You cannot change or add modules after booking; changing means cancelling and booking again, subject to test centre availability. The requirements below are from UAT-UK's course list for 2027 entry (April 2026). Check each course's own page before you book.

Cambridge: Engineering
Mathematics 1, Mathematics 2, Physics
Cambridge: Natural Sciences; Chemical Engineering and Biotechnology; Veterinary Medicine
Mathematics 1 and any two of Biology, Chemistry, Physics, Mathematics 2
Imperial: Aeronautical, Civil, Electrical and Electronic, Electronic and Information, and Mechanical Engineering; Physics
Mathematics 1, Mathematics 2, Physics
Imperial: Chemical Engineering
Mathematics 1, Mathematics 2, Chemistry
Imperial: Design Engineering
Mathematics 1, Mathematics 2 (two modules only)
Imperial: Biochemistry, Biological Sciences, Biotechnology, Ecology and Environmental Biology, Microbiology
Mathematics 1, Chemistry, Biology
Oxford: Biomedical, Chemical, Civil, Electrical, Information and Mechanical Engineering; Engineering Science; Physics; Physics and Philosophy
Mathematics 1, Mathematics 2, Physics
Oxford: Biomedical Sciences
Mathematics 1 and any two of Biology, Chemistry, Physics, Mathematics 2
UCL: Electronic and Electrical Engineering (BEng and MEng)
Mathematics 1 and any two of Biology, Chemistry, Physics, Mathematics 2

What the questions are like

Every question is multiple choice. UAT-UK describes the test as asking you to apply what you know: some questions are straightforward applications, others need more creative thinking and a principle used in an unfamiliar context. The content itself is mostly what you have already met at school; the difficulty is in using it quickly and flexibly.

There is no calculator in any module, so arithmetic, simplifying and estimating are all done by hand, and have to be quick.

Every science module and Mathematics 2 assume the whole of Mathematics 1. The mathematics in a physics or chemistry question is not what the question is testing, but it has to be quick and reliable, because the clock is tight for the number of questions.

Mathematics 1

The compulsory module, at the level of higher GCSE mathematics. Answers are exact (a surd, a fraction, a power or a multiple of π), never a decimal approximation. Formulae for spheres, pyramids and cones are given where a question needs them; everything else you recall. The areas it covers:

  • Units, number, and ratio and proportion.
  • Algebra.
  • Geometry.
  • Statistics and probability.

Mathematics 2

AS-level pure mathematics, the same content as TMUA Paper 1. It assumes all of Mathematics 1, and answers are exact, never a decimal approximation. The specification excludes, by name, the change of base formula for logarithms, differentiation from first principles, and points of inflexion. The areas it covers:

  • Algebra and functions; graphs of functions.
  • Sequences and series.
  • Coordinate geometry of lines and circles.
  • Trigonometry, including radians and the sine and cosine rules.
  • Exponentials and logarithms.
  • Differentiation and integration.

Physics

Physics at about GCSE level, applied in ways GCSE papers rarely ask. Use g = 10 N/kg for gravitational field strength on Earth, not 9.81. Units are SI throughout, written with negative indices (m s^-1 rather than m/s), and the prefixes from nano- to giga- are assumed. The areas it covers:

  • Electricity and magnetism.
  • Mechanics.
  • Thermal physics and matter (states, density, pressure).
  • Waves.
  • Radioactivity, including half-life and nuclear equations.

Chemistry

Chemistry at about GCSE level. Conventions to expect: IUPAC naming, groups numbered 1 to 18 rather than I to VIII, state symbols on equations, electron configurations written as 2,8,8,1 rather than in subshell notation, and Roman numerals for an oxidation state where an element has more than one. The areas it covers:

  • Atomic structure, the Periodic Table and group chemistry.
  • Formulae, equations and quantitative chemistry.
  • Bonding, structure and properties; particle theory.
  • Redox, electrolysis, acids, bases and salts.
  • Rates of reaction and energetics.
  • Organic chemistry, metals, separation techniques, chemical tests, and air and water.

Biology

Biology at about GCSE level. Respiration and photosynthesis are written as word equations, not symbol equations. There is no practical work: where a question needs an experiment, the method is described in the question. The areas it covers:

  • Cells, movement across membranes, and cell division.
  • Inheritance, DNA, gene technologies and variation.
  • Enzymes.
  • Animal physiology, plant physiology and ecosystems.
  • Ecosystems.

Booking your test

Create an account with UAT-UK, apply for ESAT and choose your modules, then follow the link to Pearson VUE to pick a test centre and a time. The name on your account must match your ID exactly. In the UK you should not need to travel more than 40 miles. You can reschedule or cancel free of charge up to 48 hours before your appointment.

The fee is £78 at a test centre in the UK or Ireland and £133 elsewhere; it depends on where the centre is, not on where you live. UK candidates in financial need can apply for a bursary that makes the test free. Access arrangements such as extra time or rest breaks have to be requested before their own deadline.

Applicants to Cambridge or Oxford must sit in October. The only exceptions are mature applicants to a Cambridge mature college with a January deadline, and applicants to Oxford's Astrophoria Foundation Year. You can sit ESAT only once in an admissions cycle, and if you are applying for deferred entry you still sit it in the year you apply.

October 2026 test window
12 to 16 October 2026
October: booking closes
28 September 2026, 6pm BST
October: access arrangements and bursary deadlines
14 September and 21 September 2026
October: results
16 November 2026
January 2027 test window
4 to 8 January 2027
January: booking opens and closes
26 October to 21 December 2026, 6pm GMT
January: access arrangements and bursary deadlines
7 December and 14 December 2026
January: results
8 February 2027
October 2026 sitting
12 – 16 October 2026
January 2027 sitting
4 – 8 January 2027

How the day runs

Arrive 30 minutes before your appointment. If you are more than 15 minutes late you will be turned away. Without valid ID you cannot sit the test, and you lose the fee. New for 2027 entry: check-in may include a security scan or wand, which is compulsory, and Pearson has zero tolerance for unauthorised electronic devices in the testing area.

Your belongings go in a locker outside the room. The centre gives you a computer, keyboard and mouse, and an erasable notebook and pen for working; raise your hand for a fresh sheet. Non-digital ear plugs are allowed.

Your modules run one after another with no break between them. If you stop for any reason, a toilet visit included, the timer keeps running, unless a rest break is part of an approved access arrangement.

Within a module you can flag a question to come back to. At the end of the module a review screen lists every flagged and every unanswered question, with a link back to each. Ending a module is final: once you confirm, you cannot return to it, and time you did not use does not carry into the next module.

If something goes wrong, such as a fire alarm, noise or a computer fault, report it to the staff before you leave and get a case number. Problems reported more than 24 hours after the test cannot be investigated. If the centre itself has to cancel, Pearson reschedules you to a date that still gets your result to universities in time.

What to bring, and what stays in the locker

  • Valid, original, government-issued photo ID with a signature. A passport is accepted at every centre; a photocard driving licence, or another government-issued ID card, in the country that issued it; an EU identity card at EU centres (not in the UK). UK candidates without such ID can apply for an exemption no later than five working days before the test, using a Citizen Card or a signed school letter with a photograph.
  • Food and drink, bags, books, notes, phones, pagers, watches and wallets: they stay in a locker outside the room.
  • Your own pen or paper, a calculator or a dictionary: not allowed at all.

What the scores mean

Each module gets its own score from 1.0 to 9.0, to one decimal place; there is no combined score. Candidates at different times and places see different versions of the test, so raw marks are statistically equated (UAT-UK uses Rasch analysis) to put every version on the same scale. Your score depends on how many questions you got right, the version you sat, and how the cohort performed.

There are no grade boundaries and no pass mark. Results go to you about four weeks after the test and are sent automatically to each university where you have a UCAS application to a course that uses ESAT; you cannot hide a result from such a course, and a university that does not use the test does not see it. UAT-UK publishes a report on each test's results every year, normally at the end of July.

Watch out

Common mistakes

  • Booking the wrong modules. They cannot be changed after booking, and missing a module a course requires can invalidate that application.
  • Booking a fourth module you do not need. It does not help.
  • Planning to sit in January as a Cambridge or Oxford applicant. You must sit in October.
  • Going to the toilet between modules and expecting the clock to wait.
  • Leaving a module before looking at the review screen. Once you end it, it is gone.
  • Reading a score in the 4s or 5s as a failure. The test is built so that strong applicants score below what they get at school.

Official references

Always use the specification and candidate instructions for your examination year. Guides explain the qualification; the platform’s available practice is shown separately at signup.